Please note that all openings change quickly, call for most current availability.

Barron County Wisconsin

  • No Openings at this time, be sure to check back as openings change regularly.
  • Make Room | Full Time | Temp-to-Hire
    • Day Shift 6:00am to 6:00pm | $16.00 per hour | Rotating shifts 3 or 4 days per week (No Sundays)
    • Put cheese in rings, turn/flip cheese, and cleaning.  Job is very physical, fast paced, and in a hot & humid environment.  Cheese wheels weigh around 30 to 40 lbs. each.  Must be able to do simple math, write legibly, and complete daily paperwork.  Must have a good working and interpersonal attitude.
  • Cheese Cleaning | Full Time | Temp-to-Hire
    • Day Shift 6:00am to 6:00pm | $14.00 per hour | Rotating shifts 3 or 4 days per week (Every other Sunday)
    • Night Shift 6:00pm to 2:00am | $14.00 per hour, plus $1.50 shift differential | Monday through Friday
    • Inspect each wheel of cheese and clean: any mold, debris, rough edges, or other imperfections.  Re-Salt, De-Salt, buff cheese, clean & wash racks.  Bag, Seal, Label, and Palletize Cheese.  Cheese wheels weigh 30 to 40 lbs. with occasional lifting up to 50 lbs.  Must be able to bend squat, twist, and stand for full shift.  Must be able to write legibly, do simple math, and complete daily record keeping.  Must have a good working and interpersonal attitude.

Pierce County Wisconsin

  • Sheetfed Press Operator | Full Time | Temp to Hire
    • 1st shift, 7a-4p Monday through Friday $18-$22/hr. Candidates must have offset press experience and must produce a quality product with efficiency.
  • Packagers | Full Time | Temp to Hire
    • Rotating days and night shift. $12.00 – $12.50/hour. OT required as schedule mandates. 1+ year experience in a production environment a plus. Responsible for correct packaging and assuring the quality of all products going into the package.
  • Maintenance Mechanic | Full Time | Temp to Hire
    • $18-$26/hour, Rotating Night shift. Must have a minimum of 1 year equipment maintenance experience and be able to work independently.
  • Woodworking/Carpentry | Full Time | Long Term Temp to Hire
    • 1st shift, M-F, 6 AM to 2 PM. $12/hour. Building pre-fabricated wall panels.
  • Punch Press Operator | Full Time | Temp to Hire 
    • 2nd shift, 7a-7p Monday through Thursday, $12/hr. Must have previous manufacturing experience, punch press experience is a plus!
  • Woodworking Production Laborer | Full Time | Temp to Hire
    • 1st shift, Monday through Friday, $12.00/hour. Operate a variety of woodworking and metal fabricating machines. Use of molders, shapers, wide belt sander, saws, glue racks, routers, edge planer, and more.
  • General Production Support | Full Time | Temp to Hire
    • 1st and 2nd shift, Monday-Thursday, $11/hour. Racking parts, loading/unloading line for a company that powder coats and paints products.
  • Cabinet Assembly | Full Time | Temp to Hire
    • 1st shift: 6 AM to 2:30 PM, $12/hour.

Polk County Wisconsin

  • General Labor | Part Time | Temp to Hire
    • Day Shift 9:00am to 2:00-4:30pm | $10.00 per hour | Monday through Friday
    • Looking for a flexible candidate that can help out in various departments and tasks.  Measuring & cutting cords, assembling coiled cords, cord winding & dewinding, packaging, etc.  May have some occasional heavy lifting up to 50 lbs. but regularly up to 30 lbs.
  • Motor / Pump Assembly | Full Time | Temp to Hire
    • 1st Shift 6:00am to 4:00pm | $10.00 per hour | Monday through Thursday
    • Assembling motor/pump assemblies.  Some mechanical experience would be a plus (i.e. auto, small engine, etc.)  Candidate would be lifitng 30 lbs. occassionaly and would be loosening/tightening firm hardware & plumbing.  Candidate would need to expect the job to have some dirt and grime, which customer does provide aprons for general production, but not 100% complete protection (expect to get dirty).  Potential overtime on Fridays.
  • General Production | Full Time | Temp to Hire
    • 1st Shift 6:00am to 2:30pm | $11.50 per hour | Monday through Friday
    • 2nd Shift 2:00pm to 10:30pm | $12.50 per hour | Monday through Friday
    • 3rd Shift 10:00pm to 6:30am | $12.50 per hour | Sunday Night through Friday Morning
    • Medical Manufacturing in a clean environment.  Entry level positions, no previous experience required.
  • Masker | Full Time | Temp-to-Hire
    • 2nd Shift 2:00pm to 10:00pm | $11.10 per hour | Monday through Friday
    • 3rd Shift 10:00pm to 6:00am | $11.50 per hour | Sunday Night through Friday Morning
    • Masking parts that cannot be coated so another department can complete the coating process.  Entry level position in a clean working environment.  Excellent benefits once hired to permanent employment.
  • Coating Operator | Full Time | Temp-to-Hire
    • 3rd Shift 10:00pm to 6:00am | $11.50 per hour | Sunday Night through Friday Morning
    • Loading machines, monitoring the process & equipment during a run.  Verification of coating thickness using various measurement devices and tools.  Performs routine maintenance, such as: changing pump oil, cleaning valves & cold traps, as well as performing system refurbishing at a defined interval.  Lifting up to 30 lbs.  Must be mechanically inclined.  May perform shipping & receiving, as well as other duties as requested.
  • Industrial Painter | Full Time | Temp-to-Hire
    • 2nd Shift 5:00pm to 5:00am | Pay Dependent on Experience | Sunday Night through Thursday Morning
    • This position is with a Growing Worldwide Agricultural Machinery Company seeking ambitious, responsible individuals for a full-time Industrial Painter Position.  Must be able to effectively and efficiently interact with coworkers at a professional level.  Must be able to demonstrate the necessary skills of operating various paint guns. Must be able to use air assist and airless paint spray equipment, including routine care and maintenance of such equipment.  Must be knowledgeable in the proper hanging methods, preparations, masking, and set up of parts that are to be cleaned and or painted.   Knowledge of spray booth operations and maintenance, a plus.  Employer is willing to interview with someone who doesn’t have much experience, but who is very enthusiastic about learning the trade.
  • Multiple Positions | Full Time | Temp-to-Hire
    • 1st Shift 7:00am to 3:00pm | $10.25 per hour | Monday through Friday
    • 2nd Shift 3:00pm to 11:00pm | $12.00 per hour | Monday through Friday
    • 3rd Shift 11:00pm to 7:00am | $13.00 per hour | Sunday Night through Friday Morning
    • Overtime is regularly available, and can be mandatory depending on company needs. 
    • Sheet Metal Manfucaturing Positions
      • General Assembly | Typically moderate lifting of occasionally awkward dimension materials up to approximately 30 lbs. Entry Level Positions, grow in the company.
      • Brake Press Operation (Previous Machine Operation Experience Required) | Typically moderate lifting of occasionally awkward dimension materials up to approximately 30 lbs.
      • Turret Operation (Previous Machine Operation Experience a plus) | Typically moderately heavy lifting of occasionally awkward dimension materials up to approximately 50 lbs.
  • Quality Assurance Technician | Full Time | Temp-to-Hire
    • 3rd Shift 11:00pm to 7:00am | $13.00 per hour | Sunday Night through Friday Morning
    • Standard shift, candidates may have mandatory overtime depending on the production needs.  Approves finished products, by confirming specifications, conducting visual and measurement tests, returning product to re-work, and confirming re-work.  Heavy Lifting is a requirement of the position, parts might be awkward in dimension.
  • CNC Laborer | Full Time | Temp-to-Hire
    • 1st Shift 7:00am to 3:00pm | $10.25 per hour | Monday through Friday
    • Customer has opened the CNC department to include a position for on the job training.  Skill set would need to include: good math & measuring skills.  Machine Operation experience is required.  Previous carpenters, etc would be good candidates for this position.  Candidate must have some previous machine operation experience and the ability to learn quickly.  Candidates will be expected to stand for the entire shift.  Candidates will be operating a CNC, and may have overtime depending on the production needs.
  • CNC Operator | Full Time | Temp-to-Hire
    • 3rd Shift 11:00pm to 7:00am | Pay Dependent on Experience | Sunday Night through Friday Morning
    • Candidates will be expected to stand for their entire shift.  Candidates will be operating a CNC.  Overtime may be available and/or mandatory depending on production needs.  Pay is dependent on experience, previous CNC operation experience required, set up and troubleshooting experience preferred.
  • Multiple Positions | Full Time | Temp-to-Hire
    • 1st Shift 7:00am to 3:00pm | $10.25 per hour | Monday through Friday
    • 2nd Shift 3:00pm to 11:00pm | $12.00 per hour | Monday through Friday
    • 3rd Shift 11:00pm to 7:00am | $13.00 per hour | Sunday Night through Friday Morning
    • Overtime is regularly available, and can be mandatory depending on company needs. 
    • Sheet Metal Manufacturing Positions
      • General Assembly | Typically moderate lifting of occasionally awkward dimension materials up to approximately 30 lbs. Entry Level Positions, grow in the company.
      • Brake Press Operation (Previous Machine Operation Experience Required) | Typically moderate lifting of occasionally awkward dimension materials up to approximately 30 lbs.
      • Turret Operation (Previous Machine Operation Experience a plus) | Typically moderately heavy lifting of occasionally awkward dimension materials up to approximately 50 lbs.
  • Woodworking | Full Time | Temp-to-Hire
    • 1st Shift 7:00am to 3:30pm | Pay is Dependent on Experience | Monday through Friday
    • Making display fixtures for stores.  Looking for someone with some background in woodworking, will be working with saws & power tools.  CNC experience is a plus.
  • Heat Bender | Full Time | Temp-to-Hire
    • 1st Shift 7:00am to 3:30pm | $10.00 per hour | Monday through Friday
    • Looking for someone with previous experience with heat benders; can have a background in heat bending, brake operation, or construction.  Would prefer a candidate with a good job history.
  • Digital Die Cut Operator | Full Time | Temp-to-Hire
    • 2nd Shift 2:30pm to 11:00pm | Pay is Dependent on Experience | Monday through Friday
    • Previous experience in Digital Diecutting, either with Zund or Kongsberg cutters; but willing to train someone with machine operation experience.  Must be computer literate and be able to lift up to 35 lbs.  Would prefer a candidate with a good job history.

St. Croix County Wisconsin

  • Engine Assmbly/Disassembly | Full Time | Temp-to-Hire
    • 1st Shift 7:30am to 4:00pm | Pay is Dependent on Experience | Monday through Friday
    • Will be tearing down and assembling engines, block & head machining.  Will also occasionally be in the warehouse performing shipping & receiving and general labor work.  This is a very physical position, candidate must be able to bend, twist, and lift.  Heavy Lifting is required.  Communication skills, ability to keep records, and hand-eye coordination.  Candidate with strong automotive background or highly mechanically inclined.  (Machinist, Mechanic, Machine Maintenance)  Someone that has experience working on manual machines is highly desired.
  • Machine Operator | Full Time | Temp-to-Hire
    • 1st Shift 7:30am to 4:00pm | Pay is Dependent on Experience | Monday through Friday
    • Prepare products for clenaing prior to assembly, load & run equipment to clean engine components, willingness to learn and grow, set up proper concentration of chemicals, clean components, and technical knowledge and ability to read instructions, service manuals, & drawings a plus.
  • Welding / Fabricator | Full Time | Temp-to-Hire
    • 1st Shift 6:00am to 2:30pm | Pay Dependent on Experience | Monday through Friday
    • Prefer candidates with 1 to 2 solid years of experience as a MIG welder.  Comprehend instructions and good communication skills.  Prepare products for welding and painting.  Attention to Detail is a must!
  • Industrial Painter | Full Time | Temp-to-Hire
    • 1st Shift 6:00am to 2:30pm | Pay Dependent on Experience | Monday through Friday
    • 2nd Shift 2:30pm to 1:00am | Pay Dependent on Experience | Monday through Thursday
    • Prefer candidates with 1 to 2 solid years of experience as an Industrial Painter.  Routine and preventative maintenance and painting duties.  Comprehend instructions and good communication skills are a must.  Painting small to large equipment.  Operating various tools and equipment.  Performing preparation of equipment, inspections, clean up, and proper storage & disposal of paint products.
  • No Openings at this time, be sure to check back; as openings change regularly.
  • Assembly | Full Time | Temp to Hire
    • 1st Shift 6a-2:30p Monday through Friday $11/hr.
    • Assembly of industrial light fixtures.
  • Packaging | Full Time (hours may vary) | Temp to Hire
    • 2nd shift: 4p-2:30a working 4 days Sunday through Thursday
    • Placing stacks of direct mail into the proper sack or tray. Skewer keys and affix keys, scratch offs or cards to mailing pieces and finish the mail piece for delivery to the Post Office
  • Assembly | Full Time | Long Term
    • 1st shift 8a-4:30p Monday through Friday
    • Assembly of home security systems.
  • Sheer/Brake Press Operator | Full Time | Temp to Hire 
    • 2nd shift, Monday through Friday, $13-$13.45/hour. Making wire screens used in rock crushing equipment. Dirty/heavy lifting required.
  • Production | Full Time | Temp to Hire
    • 1st, 2nd, and 3rd shifts:$11.50+/hour.
    • General production duties for a company that cuts/packages foam.
  • General Labor | Full Time | Temp to Hire
    • M-F 6am-4 or 5pm, $12.00/hour.
    • Loading and unloading sheetrock.
  • Machine Operator | Full Time | Temp to Hire
    • 1st and 2nd shifts available Monday through Friday.
    • Plastic injection, clipping and sorting parts made for snowmobile and hunting companies.
  • General Labor/Production | Full Time | Temp to Hire
    • All shifts available! $13.50-14.00 per hour depending on shift!
    • Make pre-made concrete products for bridges & underground systems.
  • Machine Operating & Assembly | Full Time | Temp to Hire
    • $12-$13.50 per hour. Full time, new 8 hour 1st, 2nd, and 3rd shifts. Plastic injection, molding, and assembly of medical devices.
  • Animal Care/Janitorial | Full & Part Time Available | Temp to Hire
    • $12.00 per hour. 1st shift, 7a – 4pm.  Every other weekend required and approximately 3-4 days during the week. Compassion for animals with physical and mental disabilities is a must! Cleaning is a large part of the position as well. GREAT OPPORTUNITY!

 

 

 

 

Minnesota

  • Ink Jet Operator | Full Time | Temp to Hire
    • Rotating Days/Nights, Pay is depending on experience. Set up and run ink jet system, folding, gluing, inserting. Math test required, must be able to pass a PST physical. Experience preferred.
  • Turret/Laser Operator | Full Time| Temp to Hire – Union once hired!
    • 1st shift, Monday through Friday, $14-$20/hour DOE. 1 year of Amada Turrets experience required.
  • Toolmakers | Full Time| Temp to Hire – Union once hired!
    • 1st shift, Monday through Friday, $25-$30/hour DOE. Machine trades experience required, Progressive die/stage tooling experience required.
  • Large Press Operator | Full Time| Temp to Hire – Union once hired!
    • 2nd shift, Monday through Friday, Pay DOE.  Must have full understanding and experience operating presses.
  • MIG/TIG Welders| Full Time| Temp to Hire – Union once hired!
    • 1st and 2nd shift, Pay is DOE.  Two year degree from welding trade school and five years of experience required.